/**
  ******************************************************************************
  * @file    cmdhandle.h
  * @author  TMC Scan Team
  * @version V1.0.0
  * @date    09/07/2019
  * @brief
  ******************************************************************************
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, TMC SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2016 TMC</center></h2>
  ******************************************************************************
**/

#ifndef __CMDHANDLE_H__
#define __CMDHANDLE_H__
#include "global.h"

//设置码长度
#define SETCODELEN 10
#define CODEMSGLEN 9
#define SYSMSGELEN 9
#define PARTCODELEN (SETCODELEN - 2)
#define MAX_SETCODELEN 20
#define SETCODELEN_MODULE 8
#define MAX_BATCH_SETCODE_LEN 256

#define HALF_BUF_SIZE  (320 * 240)
#define MAXCODELEN 2070
#define CLK_BASE  12000
#define SENSOR_TIME_OUT (CLK_BASE * 5000)      //如果感应模式5s未识读成功，则退出

#define COMMUNICATION_CMD_LEN 10

#define ONE_BYTE_SUCCESS ((uint8_t) 0x00)
#define ONE_BYTE_FAIL ((uint8_t) 0x01)

#define SYSMODE_OPEN ((uint8_t) 0x01)
#define SYSMODE_CLOSE ((uint8_t) 0x00)

#define KEY_DELAY_MAX 50
#define KEY_POLL_SPEED_MAX  10
#define STABLE_TIME_MAX     5000         //稳像时长最大值
#define SENSORTIVITY_VALUE_MAX 8000
#define SAME_CODE_INTERVAL_MAX 8000
#define CMD_MODE_TIME_MAX 65535
#define CMD_MODE_TIME_MIN 500
#define DIFFERENT_CODE_INTERVAL_MAX 8000

/** @defgroup write SN protocal
  * @{
  */
#define TUSNADDR  0x00000200
#define PRODUCT_FLAG_ADDR 0x00000400
#define PRODUCT_FLAG_LEN 5
#define PRODUCT_FLAG_VALUE "IDATA"
#define SN_PROTOCOL_WSN_OFFS    0x06    // 5A+FID+LEN(2)+DAT
#define SN_LEN_OFFS             0x00    // [Len][S][N][DATA]
#define SN_SFLAG_OFFS           0x01    // [Len][S][N][DATA]
#define SN_NFLAG_OFFS           0x02    // [Len][S][N][DATA]
#define SN_DATA_OFFS            0x03    // [Len][S][N][DATA]
#define SN_SNFLAG_LEN           0x02
#define CRLF_LEN                0x01
#define NO_SN_LEN               0x05
/**
  * @}
*/

//memory definition
#define KEY_BASE_ADDR           0x00000800

#define CRYPTO_CMD_OFFS   4


//response status definition
#define P3ERROR             0x6C        //  P3 error,6C00
#define WRERROR             0x65        //  Flash write error,6501
#define P1P2ERR             0x6A        //  P1 and/or P2 error,6A00
#define ALGOERR             0x6B      //  Alogrithm error,6507
#define RDERROR             0x6E

//标记使用哪种配置方式
#define SETTINGCODE_MODE_0  0x00            //表明先扫一个开始配置，再扫其他配置，最后再扫结束配置才生效
#define SETTINGCODE_MODE_1  0x01            //开启设置码的条件下，扫配置码直接生效


typedef enum
{
    SN_EXIT     = 0x06U,
} SN_StatusTypeDef;

typedef struct
{
    uint8_t HandleMsg[MAX_SETCODELEN]; //码的内容
    uint8_t MsgLen;
    uint8_t (*pFunc)(BarData *pCode); //码对应的操作
} ScanCodeHandle;

uint8_t OUTPicture(BarData *pCode);

uint8_t WriteBLFirstPage(void);

uint8_t UpdateApp(BarData *pCode);

//读取版本信息
uint8_t OutVersion(BarData *pCode);

//恢复出厂设置
uint8_t RestoreFactorySetting(BarData *pCode);

void ScanCodeCmdHandle(BarData *pCode);

uint8_t SettingCodeBatch(BarData *pCode);

uint8_t SM2_Oper(BarData *pCode);
uint8_t RSA_Oper(BarData *pCode);
uint8_t WriteKey(BarData *pCode);
uint8_t SM3_Oper(BarData *pCode);
uint8_t SM4_Oper(BarData *pCode);
uint8_t DES_Oper(BarData *pCode);

#endif /*__CMDHANDLE_H__*/