/**
  ******************************************************************************
  * @file    global.h
  * @author  TMC Scan Team
  * @version V1.0.0
  * @date    09/12/2019
  * @brief   
  ******************************************************************************  
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, TMC SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2016 TMC</center></h2>
  ******************************************************************************
**/

#ifndef _GLOBAL_H
#define _GLOBAL_H

#ifdef __cplusplus
 extern "C" {
#endif

//type define
typedef	void (* voidfunc) (void);
     
#include <string.h>
#include "thm36x2.h"
#include "TMC_SYSTICK.h"
#include "Version.h"
#include "TIM.h"
#include "PWM.h"
#include "RCC.h"
#include "DCMI.h"
#include "DMA.h"
#include "UART.h"	 
#include "FLASH.h"
#include "EXTI.h"
#include "PWR.h"
#include "STOP.h"
#include "flash_cache.h"
#include "GPIO.h"
#include "IIC.h"
#include "uart_main.h"
#include "audio.h"
#include "led.h"
#include "iic_main.h"
#include "configuration.h"
#include "camera_cfg.h"
#include "Scan.h"
#include "camera_main.h"
#include "usb.h"
#include "vsp.h"
#include "hid.h"
#include "wdt.h"
#include "wdt_main.h"
#include "cmdhandle.h"
#include "Scan_Para.h"
#include "outprompts.h"
#include "bsp_cfg.h"
#include "usb_init.h"
#include "buzzer.h"
#include "communication.h"
#include "scanmode.h"
#include "billmode.h"
#include "characterencode.h" 
#include "sm4.h"
#include "romTable.h"
#include "xdes.h"

//变量声明
extern volatile uint8_t gCommFlag;  //硬件检测判断是UART还是USB，如果进USB中断，则是USB
extern uint32_t gReturnBLCnt;
extern UART_HandleTypeDef ghuart1;
extern uint8_t gUartBuff[MAX_RECEIVE_DATA_LEN];
extern volatile uint16_t gUartLen;

//宏定义
#define LIMIT_TIME  20000   //限制允许恢复BL的时间

/** @defgroup TimerHSIClockCount controlType
  * @{
  */
#define START_TIMER        1
#define GET_TIMER          2
#define STOP_TIMER         3
/**
  * @}
*/

//是否支持unicode输出，需要字库100多k，需考虑资源情况；发票模式也必须支持Unicode才能实现
#define SUPPORT_UNICODE  1

//是否需要语音数据
#define SUPPORT_VOICE 1

//默认是扫码盒子配置,默认键盘输出，自动识别模式，有语音输出
#define SCANBOX 0x01

//是否是扫码模块配置,默认UART通信，命令模式，如果是，将SCANMODULE定义为1
#define SCANMODULE 0x00

// 是否是送检配置，如果是，将BCTCTEST定义为1
#define BCTCTEST   0x00

//中断向量表搬移地址定义
#define RAM_BASE_ADDR           0x20000000
#define IR_VECTOR_TABLE_ADDR    0x00
#define IR_VECTOR_TABLE_SIZE    364

//采集图像地址
#define DCMIBUFADDR 0x20028800

//License
#define LINSCENCE   0x00000600
#define SNADDR  	0x1F000020
#define SNLEN       16
#define SNFLAGLEN 8

//UPDATECFG
#define UPDATECFG   1
#define UPDATEALCFG 2
extern uint8_t gCfgUpdateFlag;

#define VOICEDATA   1
#define VOICEDELETE 2
#define VOICECLEAN  3

//函数声明
//void ResetChip(void);
void ResetChip(uint8_t entid);
void TimerDelay(TIM_TypeDef* TIMx, uint32_t ms);
uint32_t TimerHSIClockCount(TIM_TypeDef* TIMx, uint8_t controlType);
uint8_t Memcmp(uint8_t *pchDest, uint8_t *pchSrc, uint16_t bLen);
void Memcpy(u8 * dst,u8 * src,u16 len);
void Delay(u32 n);
void AppTIMxInterrupt(TIM_TypeDef *TIMx, uint32_t ms);

#ifdef __cplusplus					
}
#endif

#endif  /* _GLOBAL_H */