tz/TMC32_QJB
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
master
TMC32_QJB/USB/USB_std_req.c
hyx 7017c4c821 v1-3-3
2026-04-30 16:23:12 +08:00

438 lines
14 KiB
C
Raw Permalink Blame History

/********************************************************************************
* Copyright (c) 2012, Beijing Tongfang Microelectroics Co., Ltd.
* All rights reserved.
* Module: USB
* Author: Yang Song
* Version: V1.0
* History:
* 2012-09-24 Original version
********************************************************************************/
#include "global.h"
u8 g_bUsbRemoteWakeUp; // 0: REMOTE WAKEUP is not supported,1:supported
u8 g_bUsbEpHalt; // 0: no ep halted,others:Number of ep to be halted
const voidfunc usbStdReq[0x0D]= {usbStdReqGetStatus,usbStdReqClearFeature,usbStdReqRfu1,usbStdReqSetFeature,
usbStdReqRfu2,usbStdReqSetAddress,usbStdReqGetDescriptor,usbStdReqSetDescriptor,
usbStdReqGetConfiguration,usbStdReqSetConfiguration,usbStdReqGetInterface,
usbStdReqSetInterface,usbStdReqSynchFrame};
//******Handling 11 Standard Request******//
/***************************************************************************
* Function: usbStdReqGetStatus
* Description: Get Status request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqGetStatus(void)
{
if(((USBSTS0 & 0x0000007F) > 0) && (USBSTS0 & Bit21_En)) // Cofig state
{
if(st_usbDeviceRequest.bmRequestType == 0x80) // 1000 0000B,device
{
// if(g_bUsbRemoteWakeUp)
// USBbuf[0] = 0x02; // Remote wakeup is enabled
// else
USBbuf[0] = 0x00; // Does not support Remote Wakeup and Self-Powered
USBbuf[1] = 0x00;
}
else if(st_usbDeviceRequest.bmRequestType == 0x81) // && (st_usbDeviceRequest.wIndex == 0)) // 1000 0001B,interface 0
{
USBbuf[0] = 0x00;
USBbuf[1] = 0x00;
}
else if(st_usbDeviceRequest.bmRequestType == 0x82 && (st_usbDeviceRequest.wIndex <= 0x84)) // 1000 0010B,ep0~ep4
{
if(!g_bUsbEpHalt)
{
USBbuf[0] = 0x00; // Bit0=0,ep not halt
USBbuf[1] = 0x00;
}
else if(g_bUsbEpHalt == st_usbDeviceRequest.wIndex)
{
USBbuf[0] = 0x01; // Bit0=1,specified ep halt
USBbuf[1] = 0x00;
}
}
else
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
return;
}
g_sUsbEp0TxLen = 2;
usbEpnTxAll(0, USBbuf, g_sUsbEp0TxLen);
}
else if((USBSTS0 & 0x0000007F) > 0) // Address state
{
if(st_usbDeviceRequest.wIndex > 0) // Not interface 0 or ep0
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
return;
}
else if(st_usbDeviceRequest.bmRequestType == 0x80) // 1000 0000B,device
{
// if(g_bUsbRemoteWakeUp)
// USBbuf[0] = 0x02; // Remote wakeup is enabled
// else
USBbuf[0] = 0x00; // Does not support Remote Wakeup and Self-Powered
USBbuf[1] = 0x00;
}
else if(st_usbDeviceRequest.bmRequestType == 0x81) // 1000 0001B,interface 0
{
USBbuf[0] = 0x00;
USBbuf[1] = 0x00;
}
else if(st_usbDeviceRequest.bmRequestType == 0x82) // 1000 0010B,ep0
{
USBbuf[0] = 0x00; // Bit0=0,ep not halt
USBbuf[1] = 0x00;
}
g_sUsbEp0TxLen = 2;
usbEpnTxAll(0, USBbuf, g_sUsbEp0TxLen);
}
}
/***************************************************************************
* Function: usbStdReqClearFeature
* Description: Clear Feature request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqClearFeature(void)
{
if(((USBSTS0 & 0x0000007F) > 0) && (USBSTS0 & Bit21_En)) // Cofig state
{
if(st_usbDeviceRequest.bmRequestType == 0x00) // 1000 0000B,device
{
g_bUsbRemoteWakeUp = 0;
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,clear remote wakeup and self-powered
}
else if(st_usbDeviceRequest.bmRequestType == 0x01) // && (st_usbDeviceRequest.wIndex == 0)) // 0000 0001B,interface 0
{
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK
}
else if(st_usbDeviceRequest.bmRequestType == 0x02 && (st_usbDeviceRequest.wIndex <= 0x84)) // 0000 0010B,ep0~ep4
{
g_bUsbEpHalt = 0x00; // Clear ep halt
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,clear ep halt
}
else
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
}
}
else if((USBSTS0 & 0x0000007F) > 0) // Address state
{
if(st_usbDeviceRequest.wIndex > 0) // Not interface 0 or ep0
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
}
else if(st_usbDeviceRequest.bmRequestType == 0x00) // 0000 0000B,device
{
g_bUsbRemoteWakeUp = 0;
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,clear remote wakeup
}
else if(st_usbDeviceRequest.bmRequestType == 0x01) // 0000 0001B,interface 0
{
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK
}
else if(st_usbDeviceRequest.bmRequestType == 0x02) // 0000 0010B,ep0
{
g_bUsbEpHalt = 0;
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,clear ep halt
}
}
// Setting registers for implementing the specified USB feature
// if(!g_bUsbRemoteWakeUp)
// USBDCON &= Bit28_Dis; // Disables Remote Wakeup
}
/***************************************************************************
* Function: usbStdReqRfu1
* Description: RFU
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqRfu1(void)
{}
/***************************************************************************
* Function: usbStdReqSetFeature
* Description: Set Feature request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSetFeature(void)
{
if(((USBSTS0 & 0x0000007F) > 0) && (USBSTS0 & Bit21_En)) // Cofig state
{
if(st_usbDeviceRequest.bmRequestType == 0x00 && st_usbDeviceRequest.wValue == 1) // 1000 0000B,device,g_bUsbRemoteWakeUp
{
g_bUsbRemoteWakeUp = 1;
// USBCECON &= Bit9_Dis;
// USBCECON |= Bit8_En; // ACK,set remote wakeup
// USBCECON |= Bit9_En;
// USBCECON &= Bit8_Dis; // STALL
}
// else if(bmRequestType == 0x01)// && (wIndex == 0)) // 0000 0001B,interface 0
// {
// USBCECON &= Bit9_Dis;
// USBCECON |= Bit8_En; // ACK
// }
else if(st_usbDeviceRequest.bmRequestType == 0x02 && (st_usbDeviceRequest.wValue == 0)) // 0000 0010B,ENDPOINT_HALT
{
g_bUsbEpHalt = st_usbDeviceRequest.wIndex; // Halt specified ep
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,set ep halted
}
else
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
}
}
else if((USBSTS0 & 0x0000007F) > 0) // Address state
{
if(st_usbDeviceRequest.wIndex > 0) // Not interface 0 or ep0
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
}
else if((st_usbDeviceRequest.bmRequestType == 0x00) && (st_usbDeviceRequest.wValue == 1)) // 0000 0000B,device,g_bUsbRemoteWakeUp
{
g_bUsbRemoteWakeUp = 1;
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,set remote wakeup,self-powered is not supported
}
// else if(st_usbDeviceRequest.bmRequestType = 0x01) // 0000 0001B,interface 0
// {
// USBCECON &= Bit9_Dis;
// USBCECON |= Bit8_En; // ACK
// }
else if((st_usbDeviceRequest.bmRequestType == 0x02) && (st_usbDeviceRequest.wValue == 0)) // 0000 0010B,ep0,EPPOINT_HALT
{
g_bUsbEpHalt = st_usbDeviceRequest.wIndex; // Halt specified ep
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK,set ep halted
}
}
// if(g_bUsbRemoteWakeUp)
// USBDCON |= Bit28_En; // Enables Remote Wakeup
}
/***************************************************************************
* Function: usbStdReqRfu2
* Description: RFU
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqRfu2(void)
{}
/***************************************************************************
* Function: usbStdReqSetAddress
* Description: Set Address request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSetAddress(void)
{
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // Send ACK (0-length data packet) first, Then set the new addr after the host sends Status Stage flag pkt,
USBSTS0 &= 0xFFFFFF00; // Set address
USBSTS0 |= st_usbDeviceRequest.wValue;
while(!(USBCESTS & Bit2_En));
USBCESTS = Bit2_En; // Write 1 to clear CXSTS interrupt
}
/***************************************************************************
* Function: usbStdReqGetDescriptor
* Description: Get Descriptor request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqGetDescriptor(void)
{
u8 DscptType;
DscptType = st_usbDeviceRequest.wValue >> 8; // High u8 specifies the descriptor type
switch(DscptType)
{
case DEVICE : usbStdReqGetDeviceDescriptor(); break;
case CONFIGURATION : usbStdReqGetConfigDescriptor(); break;
case STRING : usbStdReqGetStringDescriptor(); break;
case INTERFACE : break; //INTERFACE <20><>Ϣ<EFBFBD><CFA2>ͨ<EFBFBD><CDA8>09ָ<39><D6B8><EFBFBD><EFBFBD>ȡ
case ENDPOINT : break;
// #if HID
case HIDRREPORT : hidSendReportDscrpt(); break;
// #endif
default : EP0SENDSTALL; break;
}
}
/***************************************************************************
* Function: usbStdReqSetDescriptor
* Description: Set Descriptor request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSetDescriptor(void)
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL,does not support Set_Descriptor
}
/***************************************************************************
* Function: usbStdReqGetConfiguration
* Description: Get Configuration request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqGetConfiguration(void)
{
if(((USBSTS0 & 0x0000007F) > 0) && (USBSTS0 & Bit21_En)) // Configured,send config descriptor
{
USBbuf[0] = 0x01; // Return 0x01 after configured
g_sUsbEp0TxLen = 0x01;
usbEpnTxAll(0, USBbuf, g_sUsbEp0TxLen);
}
else if((USBSTS0 & 0x0000007F) > 0)
{
USBbuf[0] = 0; // Return 0 if not configured but addressed
g_sUsbEp0TxLen = 1;
usbEpnTxAll(0, USBbuf, g_sUsbEp0TxLen);
}
}
/***************************************************************************
* Function: usbStdReqSetConfiguration
* Description: Set Configuration request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSetConfiguration(void)
{
if((st_usbDeviceRequest.wValue & 0x00FF) == 1) // Low u8 of wValue == 1,default config
{
USBSTS0 |= Bit21_En; // DVC Status Reg.CFG = 1
while(!(USBCESTS & Bit2_En)); // add by ys 20121010
USBCESTS = Bit2_En; // Write 1 to clear CXSTS interrupt
USBCECON &= Bit9_Dis; // ACK
USBCECON |= Bit8_En;
}
else if((st_usbDeviceRequest.wValue & 0x00FF) == 0) // Low u8 of wValue == 0,return addess state
{
USBSTS0 &= Bit21_Dis; // DVC Status Reg.CFG = 1
while(!(USBCESTS & Bit2_En)); // add by ys 20121010
USBCESTS = Bit2_En; // Write 1 to clear CXSTS interrupt
USBCECON &= Bit9_Dis; // ACK
USBCECON |= Bit8_En;
}
else // Low u8 of wValue == 0 or config is not supported
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL
}
}
/***************************************************************************
* Function: usbStdReqGetInterface
* Description: Get Interface request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqGetInterface(void)
{
if((USBSTS0 & Bit21_En)&&(st_usbDeviceRequest.wIndex == 0)) // Support only 1 interface
{
USBbuf[0] = 0;
g_sUsbEp0TxLen = 1;
usbEpnTxAll(0, USBbuf, g_sUsbEp0TxLen);
}
else
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL,does not support Set_Descriptor
}
}
/***************************************************************************
* Function: usbStdReqSetInterface
* Description: Set Interface request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSetInterface(void)
{
if((USBSTS0 & Bit21_En)&&(st_usbDeviceRequest.wValue == 0)&&(st_usbDeviceRequest.wIndex==0))// Support the default Alternative Setting for only 1 interface
{
USBCECON &= Bit9_Dis;
USBCECON |= Bit8_En; // ACK
}
else
{
USBCECON |= Bit9_En; // STALL,does not support Set_Descriptor
USBCECON &= Bit8_Dis;
}
}
/***************************************************************************
* Function: usbStdReqSynchFrame
* Description: Synch Frame request
* Input: NULL
* Output: NULL
* Return: NULL
* Other: NULL
**************************************************************************/
void usbStdReqSynchFrame(void)
{
if((USBSTS0 & 0x0000007F) > 0) // Address
{
USBCECON |= Bit9_En;
USBCECON &= Bit8_Dis; // STALL,does not support Set_Descriptor
}
else if(USBSTS0 & Bit21_En) // Configured,.CFG=1
{;} // To be completed,ISO transfer
}
//************End************//
Reference in New Issue View Git Blame Copy Permalink