;当 PIN_BIN_GEN_EN = 1时，生成的nvbin文件的格式包含32 byte 头信息 ;0 7 15 23 31(Byte) ; ----------------------------------------------------------------------------- ;| RFCFG OFFSET | RFCFG SIZE | CMCFG OFFSET | CMCFG SIZE | ;|-----------------------------------------------------------------------------| ;| PINCFG OFFSET | PINCFG SIZE | BTCFG OFFSET | BTCFG SIZE | ;|-----------------------------------------------------------------------------| ;| 配置内容 | ;|-----------------------------------------------------------------------------| [COMMON_CONFIG] ;此段数据都是16进制 ;0-工具使用,生成的bin文件不包含如下PIN_CONFIG段,;1-大系统使用，生成的bin文件包含如下PIN_CONFIG段 PIN_BIN_GEN_EN=1 ;[bit0]0-share,1-stand alone ->BT_ANTENNA_TYPE ;[bit1]0-nomal, bt use default path; 1-bt switch hci to uart1, for test mode ->UART1_DTM ;[bit3:2]0-defult auto;1-fixed usb20;2-fixed usb30 ->USB_SPEED_TYPE ;[bit4]0-default(USB/SDIO/PCIE);1-cp log to uart1 ->UART_LOG_ENABLE ;[bit5]0-low level valid;1-high level valid ->GPIO_WAKEHOST_VLD_LEVEL ;[bit6]0-busmonitor off;1-busmonitor on(only for 6652) ->BUSMONITOR_STATE ;[bit7]0-DCXO CFG disable;1-DCXO CFG enable ->DCXO_CFG_ENABLE BSP_CFG0=1 ;[bit15:8] BSP_CFG1=0 ;DCXO CFG enable[BSP_CFG0:bit7=1]时，DCXO=FF,为无效值,不使用配置文件中的值,其它值为有效值，使用配置文件中的值,DCXO范围0-127 ;[bit23:16] ->DCXO_CFG_VALUE BSP_DCXO=FF ;[31:24] BSP_CFG2=0 ;[byte0]0:tdd,1:fdd,2:free run ->COEX_TYPE BT=1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 WIFI=0,0,0,0,0,0,0,0 [PIN_CONFIG] ;此段数据都是16进制 ;0-不更新如下的pin功能;1-按照如下配置更新pin功能 PIN_CFG_EN=0 ;PAD name offset func select dslp_en drv_strength(default:2) normal:wpu/wpd schmitt trigger enable sleep:wpu/wpd sleep:ie/oe ; 0-aon ---------------------------------------------- 0-non_wpu_wpd 0-none_wp 1-oe ; 1-pd0 | | (BPS / Non-BPS) | (BPS / Non-BPS)| 1-50k_wpd 1-wpd 2-ie ; 2-pd1 | val | 1.8v mode(mA) | 3.3v mode(mA) | 2-40k_wpu 2-wpu 0-hz ; 4-pd2 ---------------------------------------------- 4-4.7k_wpu 4-wpus ; 8-pd3 | 0 | 2.4 / 2.8 | 4.4 / 4.8 | 6-20k_wpu ; 0x10-pd4 | 1 | 3.6 / 4.2 | 6.6 / 7.2 | ; | 2 | 4.8 / 5.6 | 8.8 / 9.6 | ; | 3 | 6 / 7 | 11 / 12 | ; | 4 | 7.2 / 8.4 | 13.2 / 14.4 | ; | 5 | 8.4 / 9.8 | 15.4 / 16.8 | ; | 6 | 9.6 / 11.2 | 17.6 / 19.2 | ; | 7 | 10.8 / 12.6 | 19.8 / 21.6 | ; ---------------------------------------------- PIN_MTMS = 0C, 0, 0, 2, 2, 0, 2, 2 PIN_GPIO2 = 10, 6, 1, 2, 1, 0, 1, 2 PIN_MTCK = 14, 0, 0, 2, 1, 0, 1, 2 PIN_GPIO3 = 18, 6, 1, 2, 1, 0, 1, 2 PIN_SDIOD3 = 1C, 0, 8, 2, 2, 0, 0, 0 PIN_SDIOD2 = 20, 0, 8, 2, 2, 0, 0, 0 PIN_SDIOCMD = 24, 0, 8, 2, 2, 0, 0, 0 PIN_SDIOCLK = 28, 0, 8, 2, 1, 0, 0, 0 PIN_SDIOD0 = 2C, 0, 8, 2, 2, 0, 0, 0 PIN_SDIOD1 = 30, 0, 8, 2, 2, 0, 0, 0 PIN_PCMDO = 34, 0, 1, 2, 1, 0, 1, 0 PIN_PCMCLK = 38, 0, 1, 2, 1, 0, 1, 1 PIN_PCMSYNC = 3C, 0, 1, 2, 1, 0, 1, 0 PIN_PCMDI = 40, 0, 1, 2, 1, 0, 1, 0 PIN_U1TXD = 44, 0, 1, 2, 0, 0, 1, 0 PIN_U1RXD = 48, 0, 1, 2, 2, 0, 1, 0 PIN_GPIO1 = 4C, 0, 0, 2, 2, 0, 2, 2 PIN_GPIO0 = 50, 0, 0, 2, 1, 0, 1, 1 PIN_U0RXD = 54, 0, 1, 2, 1, 0, 0, 0 PIN_U0TXD = 58, 0, 1, 2, 1, 0, 1, 0