8.3 KiB
8.3 KiB
RK3506 Release Note
rk3506_tee_v1.27.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-12-10 | rk3506_tee_v1.27.bin | a44cc911b51 | important |
New
- Update debug output information.
rk3506_tee_ta_v1.00.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-12-02 | rk3506_tee_ta_v1.00.bin | 3ea8b24a1 | important |
New
- Added OPTEE firmware that supports running user TA.
rk3506_tee_v1.26.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-29 | rk3506_tee_v1.26.bin | 169a13a37 | important |
New
- Added DDR trefi dynamic adjustment interface.
rk350{6,6b}_ddr_750MHz_v1.04.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-13 | rk350{6,6b}_ddr_750MHz_v1.04.bin | 0ac6b06a19 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fixed the slow booting issue when using SPI FLASH | When using SPI FLASH, the SPL is slow to load when booting | v1.03 version ddrbin update introduced |
rk3506_tee_v1.25.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-12 | rk3506_tee_v1.25.bin | 0e7e5b3c7ff | important |
New
- Support assign GPIO state for system suspend via kernel dts property
rockchip,sleep-io-config.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix can't wakeup after vdd_logic pwroff in system suspend. | Can't wakeup after vdd_logic pwroff in system suspend. | - |
rk3506_tee_v1.24.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-06 | rk3506_tee_v1.24.bin | 2f392d41853 | important |
New
- Add rk3506J support.
rk3506_usbplug_v1.02.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-05 | rk3506_usbplug_v1.02.bin | d914c6b69 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix some emmc upgrade fail issue | emmc upgrade fail | - |
rk350{6,6b}_ddr_750MHz_v1.03.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-11-05 | rk350{6,6b}_ddr_750MHz_v1.03.bin | 508b0f9682 | important |
New
- Add rk3506J support.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Optimizing RK3506B/J drive strength configuration | - | - |
| 2 | important | Fix emmc download failure issue | Stop at ddr "OUT" printing when downloading or booting | - |
| 3 | important | DDR2 frequency uses 451MHz | Since most DDR2 chips can only reach a maximum of 533M, the default DDR2 frequency is changed to 451MHz | - |
rk3506_tee_v1.23.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-10-18 | rk3506_tee_v1.23.bin | 32e87b6fe32 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix system suspend/resume fail issue | system suspend/resume fail | - |
rk350{6,6b}_ddr_750MHz_v1.02.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-10-09 | rk350{6,6b}_ddr_750MHz_v1.02.bin | c7d3dcd3f0 | important |
New
- Add rk3502 support.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | The maximum DDR frequency changed to 750Mhz | Avoid interference with wifi signals | - |
rk3506_tee_v1.22.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-10-11 | rk3506_tee_v1.22.bin | c30e6610b38 | important |
New
- Add RK3502 support.
rk3506_tee_v1.21.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-09-09 | rk3506_tee_v1.21.bin | 51771435438 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | fix hang up in tee while system resume | hang up in tee while system resume | - |
rk3506_{ddr,spl,tee}_v1.xx.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-08-28 | rk3506_{ddr,spl,tee}_v1.xx.bin | ddr:404a81a8bf#spl:a106936cd3c#tee:6c78a7d8cb3 | important |
New
- DDR: Set atags address to 0x62000; To avoid damaging last_log data, do not check soldering during reboot.
- SPL: Set atags address to 0x62000; Update text base addr to 0x3f00000.
- TEE: Set atags address to 0x62000; Update text base addr to 0x1000; Improve stable for system suspend/resume.
rk3506b_ddr_589MHz_v1.00.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-08-05 | rk3506b_ddr_589MHz_v1.00.bin | 8bd2e95bb9 | important |
New
- Add RK3506B support.
rk3506_tee_v1.10.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-08-01 | rk3506_tee_v1.10.bin | 2b96ee171e2 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | fix gpio1 lost power after system suspend | gpio1 lost power after system suspend | - |
rk3506_{ddr,spl,usbplug,tee}_v1.00.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2024-07-17 | rk3506_{ddr,spl,usbplug,tee}_v1.00.bin | ddr:8bd2e95bb9#spl:c80444b1e9a#usbplug:b9b1493#tee:1bfd9b50333 | moderate |
New
- Initial version.