ArtInChip Display Engine
==========================

Required properties:
 - port@[0-1]: Port nodes with endpoint definitions as defined in
  Documentation/devicetree/bindings/media/video-interfaces.txt.
  Port 0 is the input port connected to the display fb,
  port 1 is the output port connected to the display interface.

Optional properties:
 - status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
 - tearing-effect: This describes the tearing effect mode,
   The value defined by include/dt-bindings/display/artinchip,aic-disp.h
 - te-pulse-width: The tearing effect signal pulse width in pixel clock cycle.

Example:

	&de0 {
		tearing-effect = <TE_BYPASS>;
		te-pulse-width = <300>;
		status = "okay";

		port@0 {
			reg = <0>;
			de0_in: endpoint {
				remote-endpoint = <&fb0_out>;
			};
		};

		port@1 {
			reg = <1>;
			de0_out: endpoint {
				remote-endpoint = <&lvds0_in>;
			};
		};
	};